ABUS CASA30500 Operating instructions - Manual (Page 32)

32
English
7.4 General system settings
Pressing the button gives you access to the system settings. Note that you can block access to the
settings menu by assigning a PIN.
You can save settings in the submenus by pressing the button. Pressing this button also takes you to
the higher-level item in the main menu.
7.4.1 PIN lock settings
By assigning a 4-digit PIN, you can secure your Eycasa main unit against unauthorized access to the
system settings. After the function is activated, your PIN is requested every time the system settings are
called up.
PIN
Entry of a 4-digit number on the on-screen keypad.
Repeat PIN Confirmation of the entered PIN to avoid typos.
Show PIN Display the PIN code during entry.
Enable PIN Activates the PIN lock function.
Information:
The PIN lock setting is retained even after the device is turned off or restarted. If you lose
your PIN, a restore is possible using the SuperPIN. To use the SuperPIN, enter the time
displayed on the device in the format HHMM (H = hour / M = minute) as the PIN.