ABUS CASA30500 Operating instructions User Manual
Page 19
19
English
Follow the instructions on the screen and press and hold the pairing button on the camera. The Status LED
on the camera starts flashing red and green. Now press “Next”.
Your Eycasa main unit then connects to the Family Care camera. The process can take several seconds.
The setup wizard will signal whether the process is complete or whether it needs to be repeated due to a
pairing error.
If the message “Family Care camera was successfully assigned” appears, the assignment process is
finished. If an error occurs during the process, repeat the previous assignment steps.
You can now proceed with the installation of the unit (see section 6).