ABUS CASA30500 Operating instructions User Manual
Page 33
33
English
7.4.2 Software update settings
Here you can update the software of your Eycasa main unit using an SD card.
On our homepag
you can check whether a new firmware file is available for the
CASA31000 Eycasa main unit. The following steps must be carried out with the update:
1. Download the firmware update from the ABUS homepage.
2. Unzip the update to an SD card.
3. Insert the SD card into main unit and start updating.
You can find the remaining steps in the readme file included with the download. Before the update, make
sure your SD card is formatted as FAT32.
7.4.3 Language settings
Select the desired system language for your Eycasa main unit.
Upon reset or during initial start-up of the main unit, a system language must first be selected.