ABUS CASA30500 Operating instructions - Manual (Page 22)

22
English
You can now open the plastic cover of the doorbell button and attach your nameplate. For labeling, you can
use the included nameplate or the PDF template on the included CD.
Connect the power (12
–24 V AC/DC) and an optional electronic door opener (RELAY 1) and/or an electronic
door bell (RELAY2) to the terminal block of the video door station.
If you operate the video door station alternatively using batteries, insert the batteries into the battery
compartment. Pay attention to the polarity when inserting the AA batteries.
Note:
In software version 1.0, RELAY 2 is disabled for the Eycasa main unit.
Important:
When operating with a permanent power supply (e.g.: bell transformer), the video door station
requires up to 800 mA at 12 V. Make sure that downstream consumers (such as electronic
door openers) do not exceed the total output of the voltage source.
Important:
The video door station is subject to limitations in battery mode to ensure the longest possible
battery life. The following functions are disabled:
Proximity key, backlighting of the doorbell button, door opener and door bell function (no relay
triggering), continuous video transmission.
We recommend that you run the video door station on a permanent power supply to be able
to use the full functionality.
55 mm
55
mm