Canon EOS D30 - Manual (Page 67)

3
Adv
anced Oper
ations
67
You can set the EOS D30’s drive mode to single-image shooting, continuous shooting or self-
timer operation.
Single-image shooting
〈 〉
: Press the shutter button to take one image.
Continuous shooting
〈 〉
: You can use the continuous shooting mode by pressing and
holding the shutter button. The maximum number of images that
can be taken for each quality setting is shown in the table below.
Self-timer operation: You can set the self-timer to take a picture after 10 seconds. ( → 85)
● Based on Canon testing standards (shutter speed of 1/250 second or faster, at ISO 100).
● The number of frames that can be recorded depends on the subject and modes used.
1 Press the
〈
DRIVE
〉
button. ( )
2 Select the drive mode.
● Look at the LCD panel as you turn the
〈 〉
or
〈 〉
dial.
● Press the shutter button down halfway to
return to ready-to-shoot mode.
6
ONE SHOT AI SERVO
8
17
17
30
3
Selecting a Drive Mode
: Single-frame shooting
: Continuous shooting
: Self-Timer Operation
Size/Quality
Large/Fine
Large/Normal
Small/Fine
Small/Normal
RAW
ONE SHOT
3
AI SERVO
2.5
Maximum number of images
(Approx. images/sec.)
Maximum number of images
(Approx. images)