beautypg.com

Inserting and removing the battery pack, Inserting the battery pack – Canon EOS D30 User Manual

Page 27

background image

Inserting the Battery Pack

Load a fully charged BP-511 battery pack into the camera.

1

Open the battery chamber cover.

Slide the lever in the direction shown by the
arrow in the diagram, and open the cover
as shown.

2

Load the battery into the camera.

Make sure the battery pack is facing the
right way, and insert it into the battery
chamber.

Insert the battery pack until it locks into
place.

3

Close the cover.

Press the cover closed until it clicks shut.

Battery Charge Remaining Icons

The level of charge remaining is shown in three stages when the Main Switch is set to

ON

.

(→33)

: Charge is sufficient.

: Charge is low.

: Battery pack must be charged.

27

Inserting and Removing the Battery Pack

1

Bef

ore Y

ou
Begin

If the level of charge remaining runs out when you are using the menu screen or
playing back an image, a no battery warning appears on the LCD monitor. When
this occurs, remove the battery and charge it.