Canon EOS D30 - Manual (Page 137)

7
REFERENCE
137
Error Codes
When a camera error occurs, an error code (Err xx) appears on the LCD panel. When this
happens, set the Main Switch to
〈
OFF
〉
and then set it to
〈
ON
〉
again.
If an error code is displayed frequently, this indicates that a malfunction has occurred.
Make a note of the error code and contact your nearest Canon Service Center (see back
cover).
If an error code is displayed after you take a picture, the picture may not have been
recorded. Press the play button and review the image.
Message List
The following messages are displayed on the LCD monitor.
Processing... A picture is being stored on the CF card, or the camera is loading a
recorded image.
CF card is missing Attempted to take a picture or play an image with no CF card in the
camera.
CF card error There is a problem with the CF card.
CF card full The CF card has stored all the pictures it can hold. No more pictures
can be stored. Also no more print orders can be stored.
Unable to create file name A file already exists with the file name that the camera is attempting
to create. Or the file numbers have already reached the maximum
value and no new file numbers can be created. Transfer the
necessary number of images to a computer, then use the computer
to format the CF card. Note that formatting will erase all images and
information on the CF card.
No image No images are recorded on the CF card.
Image is too large Attempted to play an image having a size larger than 3200
×
2400
pixels.
Non-compatible JPEG Attempted to play an image having a JPEG format that is not
compatible with the camera.
Data is corrupted Attempted to play an image containing corrupted data.
Unable to rotate image Attempted to rotate an image recorded by another camera or in
another format, or processed by a computer.
Unable to identify image Attempted to play an image taken in a special format (such as a
format unique to a camera from another manufacturer).
Protected Attempted to erase a protected image.
Setting is too high Attempted to enter a print order quantity that is too high. Enter a
lower quantity.
Unable to complete setting Print order or slide show setting could not be stored.