Canon EOS D30 - Manual (Page 105)

5
Pla
ying and Er
asing Recorded Images
105
Viewing Recorded Images
Automated Playback of Recorded Images (Auto playback)
This function automatically and continuously displays all images recorded on the CF card.
Each image is displayed for approximately 3 seconds.
1 From the menu, select [Auto
playback].
● Press the
〈
MENU
〉
button.
● Turn the
〈 〉
dial to select [Auto
playback].
2 Start auto playback.
● Press the
〈 〉
button.
The camera loads the images, and after the
“Loading image…” screen has been
displayed for approximately 2 seconds, the
auto playback starts.
● To pause auto playback, press the
〈 〉
button. During the pause, the [ ] indicator
appears in the upper left part of the image.
To resume, press the
〈 〉
button again.
● To quit auto playback, press the
〈
MENU
〉
button.
While auto playback is paused, you can turn the
〈 〉
dial to change the picture in
the same way as for single-image display (→102).
● During auto playback, the Auto power off function (→33, 121) does not operate.
After you have finished viewing, be sure to press the
〈
MENU
〉
button to stop the
auto playback.
● Display time may vary depending on the image.