Extron Electronics RGB 300 - Manual (Page 13)

Chapter 3 • RGB 300 Front Panel Procedures Chapter 3 • RGB 300 Front Panel Procedures
Extron RGB 300 Universal Interface • User’s Manual Extron RGB 300 Universal Interface • User’s Manual
____ If cables are not connected, changes cannot be saved.
Memory Block Preset Configurations
Record any new video format configurations in the
appropriate block numbers in the table below.
____ When the RGB 300 scans the memory blocks, it starts with
Mem #1 and loads the first block it sees that matches the video
input. For this reason, a customized block in a higher memory
location may not load automatically. In this case, the user may
have to load it.
Mem# FormatPixel x Line Hor.kHz Ver.Hz
01 VGA1 640 x 350 31.5 70
02 VGA2 640 x 400 31.5 70
03 VGA3 640 x 480 31.5 60
04 VESA1 800 x 600 35.2 56
05 VESA2 640 x 480 37.9 72
06 VESA31024 x 768 48.4 60
07 VESA41024 x 768 56.4 70
08 Mac 12”512 x 384 24.5 60
09 Mac 13”640 x 480 35.0 60
10 Mac 16”832 x 624 49.7 75
11 Mac 21”1152 x 870 68.7 75
12 Sun1 1152 x 900 71.7 76
13 Sun21280 x 1024 81.0 76
14 SGI 1280 x 1024 63.9 60
15
16
17
18
19
20
21
22
23
24
025
3-5
4
LCD Menu Descriptions
Menu Sequence Flowchart
Adjustment Menus
Sync Menus
Save Menus
RGB 300 Digital Universal Interface
User's manual