Extron Electronics TLP 700TV User Guide - Manual (Page 41)

Audio input — see S-video or composite video MTP transmitters' specifications
NOTE: Audio input is available only from an Extron MTP transmitter through the RJ-45 connector in the base of
the unit. If the base is removed from the TLP 700TV, connections are via BNC connectors, and there is no
audio input.
Number/signal type ........................ 1 stereo, balanced/unbalanced, line level, as part of a set of proprietary signals
from an Extron MTP
Connector ...................................... 1 female RJ-45 (shared with video input)
Audio output
Speaker output .............................. 1 mono, 80 dB SPL, 0.1 watt, 0.1 m, half space
Frequency response ........................ 500 Hz to 16 kHz, ±5 dB
Playback format(s) .......................... WAV files: 8 bit PCM, mono, 8 kHz sampling
General
External power supply .................... 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 3 A, regulated
Power input requirements .............. +12 VDC, 0.75 A
Temperature/humidity .................... Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling .......................................... Convection, vents on top rear
Mounting
Furniture or wall mount ........... Set on tabletop or mount to optional VESA D 75 mm panel mount kit
Adjustment ranges ......................... Tilts through a 45° range
Enclosure type ................................ Plastic
Enclosure dimensions ..................... 7.7" H x 9.4" W x 8.2" D
(19.6 cm H x 23.9 cm W x 20.7 cm D)
(Includes base. Total height and depth depends on screen tilt. See the following
diagrams.)
TLP 700MV and TLP 700TV • Specifications 35