Extron Electronics TLP 700TV User Guide - Manual (Page 11)

There are three buttons recessed behind the bezel. These buttons are used to configure
the unit and reset parameters to factory defaults:
LIGHTS
ON
DISPLAY
MUTE
AUDIO
MUTE
SPEECH
MUTE
AUTO
IMAGE
FREEZE
LIGHTS
OFF
SCREEN
SCREEN
HELP
?
7
8
9
10
Figure 3. TLP 700MV Front Panel with Bezel removed
g
Reboot button — shuts down and restarts the unit without changing any of the
parameters.
h
Reset button — allows the unit to be reset in any of four different modes. For further
information see “ Reset Modes ” on page 46.
i
Menu button — activates the on-screen menus for calibrating the unit (see
page 11).
j
Reset LED — is visible only when the bezel has been removed. It lights as an indicator
for the Reset modes. For further information see “ Reset Modes ” on page 46.
TLP 700MV and TLP 700TV • Panel Features 5