Extron Electronics MAV 44_48_84_88 Series User Guide - Manual (Page 64)

Remote Operation, cont’d
MAV 44 / 48 / 84 / 88 Matrix Switchers • Remote Operation 4-8
Command/response table for SIS commands (cont’d)
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Resets
Reset global presets Esc ZG Zpg Clear all global presets.
Reset individual global preset Esc X11 ZG Zpg X11 Clear global preset X11 .
Reset audio input levels Esc ZA Zpa Reset all input audio levels such
that the output is -12 dB (captive
screw audio connector (A)
models) or 0 dB (RCA audio
connector (A RCA) models).
Reset audio output levels Esc ZV Zpv Reset all output audio levels to
pro level
(captive screw audio
connector (A) models) or
consumer level
(RCA audio
connector (A RCA) models).
Reset all mutes Esc ZZ Zpz Unmute all outputs.
Reset whole switcher Esc ZXXX Zpx Clear all ties and global presets,
and reset all audio gains to the
factory default.
View ties, gain, mutes, and presets
Read video output tie X3 % X2 Video input X2 tied to output X3 .
Read RGB output tie X3 & X2 RGB input X2 tied to output X3 .
Read audio output tie X3 $ X2 Audio input X2 tied to output X3 .
Read input gain X1 G X4
Example: 3G -06 Audio input 3 level is -6 dB.
View all output mutes Esc VM X7
1
X7
2
X7
3 ... X7
n Each position listed in the
response is an output:
left = output 1, right = the
highest output number for this
model.
Example (MAV 84 AV): Esc VM 0132 Output 1 is unmuted, output 2
video is muted, output 3 video
and audio are muted, and output
4 audio is muted. Outputs 5
through 8 are not present on this
switcher.