Extron Electronics MAV 44_48_84_88 Series User Guide - Manual (Page 20)

Installation, cont’d
MAV 44 / 48 / 84 / 88 Matrix Switchers • Installation 2-4
Cabling and Rear Panel Views
All connectors are on the rear panel. The switcher can be connected to up to eight
S-video, composite video, and/or stereo audio sources, depending on the model.
The switcher can output to up to eight S-video, composite video, and/or audio
devices.
Figure 2-2 shows a MAV 44 AV composite video and audio switcher. Figure 2-3
shows a MAV 88 SVA RCA S-video and audio switcher. All of the switchers are
housed in the same 1U enclosures, but have more or fewer input connectors to
accommodate the different configurations they provide. The two switchers shown
have all of the connector types that are available in the MAV AV product family
covered in this manual.
Some devices, such as VCRs, can be connected to both video and audio input and
output connectors of the switcher. Others, such as tape players or CD players, can
be connected only to the audio input connectors. An audio device and a separate
video device can share an input, because the switcher is capable of switching video
and audio separately (audio breakaway).
100-240V 0.3A
50-60Hz
INPUTS OUTPUTS SYNC
IN 1
2 3
4
OUT
INPUTS
MAV 44 AV
RS-232
OUTPUTS
1
2 3
4 L R 3
L R 4
L R 1
L R 2
L R 3
L R 4
L R 1
L R 2
12 9 11 10 1 5 7 3
Figure 2-2 — MAV 44 AV composite video switcher with audio
100-240V 0.3A
50-60Hz
INPUTS OUTPUTS SYNC
IN 1
2 3
4 5
6 7
8
OUT
INPUTS
1 2 5 3 8 6 4 7
L
R
MAV 88 SVA RCA
RS-232
OUTPUTS
1 2 5 3 8 6 4 7
1
2 3
4 5
6 7
8
12 11
10
2 6 8 4 9
Figure 2-3 — MAV 88 SVA RCA S-video switcher with audio on RCA
connectors
Video input and output connections
1 Composite video inputs (composite video [V] switchers only) — For each
input, connect a composite video source to one of these BNC connectors.
2 S-video inputs (S-video [SV] switchers only) — For each input, connect an
S-video source to one of these 4-pin mini DIN connectors.
3 Composite video outputs (composite video [V] switcher models only) —
Connect a composite video display or other device to these BNC connectors
for each composite video output.
4 S-video output (S-video [SV] switchers only) — Connect an S-video display
or other device to this 4-pin mini DIN connector for each S-video output.