Extron Electronics MAV 44_48_84_88 Series User Guide - Manual (Page 34)

Operation, cont’d
MAV 44 / 48 / 84 / 88 Matrix Switchers • Operation 3-10
3 . Press and release the Output 1 button (figure 3-11).
7 6 5 2 4 1 8 3
OUTPUTS
Press and release the Output 1 button.
The Output 1 LED blinks to indicate that the selected input will be tied to this output.
= Blinking LED
Figure 3-11 — Select the output
4 . Press and release the Enter button (figure 3-12).
ENTER 3 4 8 1 5
INPUTS OUTPUTS
The LEDs for the selected input, the selected outputs,
and the tied outputs light steadily for approximately 1
second to indicate the tie and then go out. Press the Enter button to
confirm the configuration
change.
1 second
Figure 3-12 — Press the Enter button
The current configuration (figure 3-13) is now:
• Input 5 video tied to output 1, output 3, output 4, and output 8
• (Audio/video switchers only) Input 5 audio tied to output 3, output 4,
and output 8
Input 5 video tied
to outputs 1, 3, 4, and 8.
Input 5 audio tied
to outputs 3, 4, and 8.
Input
Output
1
3
4
8
5
Video
Audio
Figure 3-13 — Example 2, final configuration