Extron Electronics MAV 44_48_84_88 Series User Guide - Manual (Page 33)

3-9 MAV 44 / 48 / 84 / 88 Matrix Switchers • Operation
The current configuration (figure 3-8) is now:
• Input 5 video and audio tied to output 3, output 4, and output 8
Input 5 (video/audio) tied
to outputs 3, 4, and 8.
Input
Output
3
4
8
5
Video
Audio
Figure 3-8 — Example 1, final configuration
Example 2: Add a video tie to a set of video and audio ties
The following steps show an example in which a new video tie is added to the
current configuration. The example shows the front panel indications that result
from your actions.
This example assumes that you have performed example 1.
1 . Audio/video switchers only — Select video only for the tie (figure 3-9).
I/O
AUD
VID
Press the button to cycle
through the selections.
The video LED lights when video is selected.
The audio LED is off when audio is deselected.
Figure 3-9 — Select video only
2 . Press and release the Input 5 button (figure 3-10).
2 6 5 4
INPUTS OUTPUTS
1 8 6 5 4 3 7
Press and release the Input 5 button.
The Input 5 LED lights to
indicate that input 5 is selected. The Output 3, Output 4, and Output 8 LEDs light to indicate the ties created in
example 1.
Figure 3-10 — Select an input