Extron Electronics IPL T Series Setup Guide - Manual (Page 12)

6 IPL T Series • Introduction
Figure 4. Global Configurator Application Screen
Using GC you can configure a single room controller or create a
Web-based remote monitoring system for hundreds of A/V devices in
multiple locations.
You can configure an IPL T controller using GC without having the
device physically connected to the A/V network.
CAUTION: Use Global Configurator version 3.0 or later. Update
all PCs and devices running earlier versions of GC.
NOTE: Ethernet driver support requires Global Configurator 3.0
and firmware version 1.15 or higher.