3 navigation example 1: setting the language, Navigation example 1: setting the language, Ee section 4.3.3) – Xylem pHotoFlex/pHotoFlex Turb User Manual
Page 30
Operation
pHotoFlex / pHotoFlex Turb
30
ba75491d04
07/2006
4.3.3
Navigation example 1: Setting the language
Note
The following example describes in the language of the country how to
set the language. On delivery, English is set as the language in the
pHotoFlex (Turb). During initial commissioning, the language is set in
the menu, Configuration / System / Language.
1
In the measured value display:
Open the Configuration menu with .
The instrument is in the configuration mode.
2
Select the System menu with <
▲> <▼>.
The current selection is displayed in reverse video.
3
Open the System menu with
4
Select the Language menu with <
▲> <▼>.
The current selection is displayed in reverse video.
5
Open the setting of the
Language
with
6
Select the required language with <
▲> <▼>.
7
Confirm the setting with
The setting is active. The menu is displayed in the selected lan-
guage.
Language
:
Deutsch
Store
Display
Reset
Interface
Continue ...
System
Language
:
Deutsch
Store
Display
Reset
Interface
Continue ...
System