Xylem Oxix Dissolved Oxygen Transmitter - Manual (Page 44)

44 GB Oxix Manual 080915
FW: 841013-009, 846001-002, 841513-009
Dissolved Oxygen Transmitter
Datalogger
Oxix® provides a data logger with a capacity of approx. 20,000 entry
points. See Appendix D on page
97 for examples and descriptions of log
files.
The data logger operates after the FIFO principle (First In, First Out). If the
data logger is full and new data are coming in, the oldest data are dis-
carded.
1. Press the up/down keys to highlight the required menu line
(here: Datalogger) and then press OK to select it.
Specify main Screen
Datalogger
Password
Sensor name
Converter setup
Display setup
Back Select OK
Login
Activate/deactivate
Set new password
Back Select OK
Set log interval
0020 sec
Back Select >
Datalogger
Sensor name
Oxix 1
Back Select >
Sensor name
Select line
Linie 1 - Sensor name
Linie 2 - Oxygen sat.
Linie 3 -
Linie 4 -
Linie 5
Back Select OK
Specify main Screen Converter setup
Language
Set Clock
Modbus
Factory settings
Display SW version
Back Select OK
Display setup
Averaging
Units
mA output
Cleaning
High Alarm
Low Alarm
Sensor Error
Status
Factory settings
Service menu
Back Select OK
Select line content
Not in use
Sensor name
Measurement
Temperature
Clock
Back Select OK
Password
Type password
0000
Back Select >
Set new password
0000
Back Select >
Activate
Deactivate
Back Select OK
Login
Activate/
Deactivate
Set new password
Oxix1
Oxygen sat. %
Select Set up
Main Menu
Converter Overview Menu
Oxix1 91.9 %
Susix1 578 mg/L
Back Select Display
Display Overview Menu
Display setup
Sensor name
Aeration Tank Inlet
Back Select >
Sensor name
GB Oxix menuer #1 Main menu FW: 841013-009, 846001-002, 841513-009 Page 1 of 7 15. september 2008
2. Press the up/down keys to change the highlighted digit, and then press
the right-key (>) to proceed to the next digit.
Specify main Screen
Datalogger
Password
Sensor name
Converter setup
Display setup
Back Select OK
Login
Activate/deactivate
Set new password
Back Select OK
Set log interval
0020 sec
Back Select >
Datalogger
Sensor name
Oxix 1
Back Select >
Sensor name
Select line
Linie 1 - Sensor name
Linie 2 - Oxygen sat.
Linie 3 -
Linie 4 -
Linie 5
Back Select OK
Specify main Screen Converter setup
Language
Set Clock
Modbus
Factory settings
Display SW version
Back Select OK
Display setup
Averaging
Units
mA output
Cleaning
High Alarm
Low Alarm
Sensor Error
Status
Factory settings
Service menu
Back Select OK
Select line content
Not in use
Sensor name
Measurement
Temperature
Clock
Back Select OK
Password
Type password
0000
Back Select >
Set new password
0000
Back Select >
Activate
Deactivate
Back Select OK
Login
Activate/
Deactivate
Set new password
Oxix1
Oxygen sat. %
Select Set up
Main Menu
Converter Overview Menu
Oxix1 91.9 %
Susix1 578 mg/L
Back Select Display
Display Overview Menu
Display setup
Sensor name
Aeration Tank Inlet
Back Select >
Sensor name
GB Oxix menuer #1 Main menu FW: 841013-009, 846001-002, 841513-009 Page 1 of 7 15. september 2008
3. Continue until all digits have been set and press OK.
The log interval can be set in intervals from 10 seconds up to 9999
seconds.