Xylem IQ SensorNet ViSolid 700 IQ (SW) - Manual (Page 10)

Safety instructions ViSolid
®
700 IQ (SW)
2 - 2 ba76040e02 07/2013
2.1 Authorized use
The authorized use of the ViSolid
®
700 IQ (SW) consists of its use as
a total suspended solids sensor in the IQ S ENSOR N ET .
Please observe the technical specifications according to chapter 7
T
ECHNICAL DATA . Only operation according to the instructions given in
this operating manual is considered to be authorized.
Any other use is considered to be unauthorized. Unauthorized use
invalidates any claims with regard to the guarantee.
CAUTION
The sensor warms up during operation in the air. Consequently,
pollution can collect in the vicinity of the measurement window
due to the evaporation of liquid. Therefore, avoid any lengthy
operation in the air.
CAUTION
Only connect and operate the sensor together with IQ Sensor Net
accessories.
2.2 General safety instructions
The sensor left the factory in a safe and secure technical condition.
Function and
operational safety
The smooth functioning and operational safety of the sensor can only
be guaranteed if the generally applicable safety measures and the
specific safety instructions in this operating manual are followed during
operation.
The failure-free function and operational safety of the sensor is only
guaranteed under the environmental conditions that are specified in
chapter 7 T
ECHNICAL DATA .
The specified temperature (chapter 7 T ECHNICAL DATA ) must be
maintained during the operation and transport of the sensor.
CAUTION
The sensor may only be opened by specialists authorized by YSI.