YSI DIQ/S 182-MOD System 182 - Manual (Page 83)

System 182 The SETTINGS menu
5 - 3 ba76025e01 02/2012
Note
To accept all settings, you have to highlight the Save and quit menu
item at the lower end of the setting table and press
g
. If you exit the
setting table via
m
,
e
/Quit or the Quit menu item, all changes are
ignored.
Inactive sensor datasets An inactive dataset for an IQ sensor arises if the Universal Transmitter
receives no signals from an already registered IQ sensor. The Error
display appears on the measured value display instead of a measured
value.
An inactive dataset can be reactivated by assigning it, e.g. to an IQ
sensor of the same type (see section 9.3.2). All settings are retained. If
you no longer require these data, you can erase them. All the settings
belonging to this IQ sensor as well as any links with outputs are deleted
by this action.
Proceeding: deleting
inactive datasets
8 Edit the setting table as described in section 4.3.2.
1 Open the SETTINGS menu with
s
.
2 Using
w
and
g
Sensor, select and confirm the S0x menu
item (corresponding to sensor 1 or sensor 2).
If the dataset is inactive the following display appears:
3 Select Delete dataset with
d
and confirm with
g
.
The dialog window for the security prompt appears.
4 Select Delete dataset with
d
and confirm with
g
.
The inactive sensor is erased.