YSI DIQ/S 182-MOD System 182 - Manual (Page 38)

Installation System 182
3 - 24 ba76025e01 02/2012
3.5.4 Top hat rail mounting
Materials required  THS/IQ kit for top hat rail mounting (see chapter 12 A
CCESSORIES
AND OPTIONS ).
Tools  Phillips screwdriver.
Mounting the Universal
Transmitter on a top hat
rail
Fig. 3-21 Mounting the Universal Transmitter on a top hat rail
1 Screw the clamping assembly (pos. 1 in Fig. 3-21) onto the
back of the Universal Transmitter with the two plastic tapping
screws (pos. 2).
2 Attach the Universal Transmitter onto the top hat rail from
above using the clamping assembly and press against the rail
until the clamping assembly clicks into place. The Universal
Transmitter can be moved sideways afterwards.
3 To unhook the Universal Transmitter, press it downward and
pull it forward at the bottom.
Fo r sta ck m
ou nting
rem
ove lab el
an d insta
ll co ntact ca
rrier
1
2