Xylem HandyLab 680 User Manual
Page 97
HandyLab 680
Operation
97
ba77041e01
03/2014
The sensor settings are reset under the Reset menu item in the menu
for calibration and measurement settings. To open the settings, display
the required parameter in the measured value display and press the
key.
ORP
The following settings for ORP measurements are reset to the default
settings with the Reset function:
The sensor settings are reset under the Reset menu item in the menu
for calibration and measurement settings. To open the settings, display
the required parameter in the measured value display and press the
key.
Dissolved oxygen
The following settings for D.O. measurements are reset to the default
settings with the Reset function:
The sensor settings are reset under the Reset menu item in the menu
for calibration and measurement settings. To open the settings, display
the required parameter in the measured value display and press the
key.
mV resolution
0.1
Asymmetry
0 mV
Slope
-59.2 mV
Man. temperature
25 °C
Single-point calibration
off
Setting
Default settings
Setting
Default settings
mV resolution
0.1
Man. temperature
25 °C
Setting
Default settings
Cal. interval
180d
Check interval
60 d
Measured parameter
D.O. concentration
Relative slope (S
Rel
)
1.00
Salinity (value)
0.0
Salinity (function)
Off