Xylem HandyLab 680 - Manual (Page 34)

Operation HandyLab 680
34 ba77041e01 03/2014
4.4 Sensor-independent settings
The Storage & config menu includes the following settings:
 System (see section 4.4.1).
 Data storage (see section 4.4.2)
4.4.1 System
Overview The following sensor-independent meter characteristics can be
adjusted in the Storage & config/System menu:
 Menu language
 Beep on keystroke
 Loudness of the beep
 Illumination
 Brightness
 Interval of the automatic switchoff
 Data interface
 Clock and date function
 Reset of all sensor-independent system settings to the default con-
dition
Settings To open the Storage & config menu, press the
_
> key
in the measured value display. After completing the settings, switch to
the measured value display with .
Default settings are printed in bold.
Menu item Setting Description
System / General / Language Deutsch
English
(more) Selects the menu language
System /
General /
Acoustic signal Beep 1
Beep 2
off Switches on/off the beep on
keystroke
System / General / Volume 0 ... 5 ... 10 Changes the loudness of the
beep
System / General / Illumination Auto
on Switches the display illumina-
tion on/off
System / General / Brightness 0 ... 15 ... 22 Changes the display bright-
ness
System / General / Switchoff time 10 min ... 1h ... 24 h Adjusts the switch-off time