Acer Altos R510 - Manual (Page 76)

4 Configuring the system 64
18 Install the chassis cover. For instructions, see “Installing the Chassis
Cover”
19 (Optional) Install the front bezel. For instructions, see “Removing
and Installing the Front Bezel.”
20 Plug all peripheral devices and the AC power cable back into the
server.
Removing a Floppy Drive from the Converted
Hard Drive Bay
1 Observe the safety and ESD precautions at the start of this book.
2 Power down the server and unplug all peripheral devices and the
AC power cable.
3 Remove the chassis cover. For instructions, see “Removing the
Chassis Cover.”
4 Remove the front bezel if it is installed. For instructions, see
“Removing and Installing the Front Bezel.”