Acer Altos R510 - Manual (Page 119)

107
Secondary
IDE Slave N/A While entering setup,
BIOS auto detects the
presence of IDE devices.
This displays the status of
auto detection of IDE
devices. Selects submenu
with additional
device details.
Third IDE
Master N/A While entering setup,
BIOS auto detects the
presence of IDE devices.
This displays the status of
auto detection of IDE
devices. Selects submenu
with additional
device details.
Fourth IDE
Master N/A While entering setup,
BIOS auto detects the
presence of IDE devices.
This displays the status of
auto detection of IDE
devices. Selects submenu
with additional
device details.
Hard Disk
Write Pro-
tect Disabled
Enabled Disable/Enable device
write protection. This
will be effective only if
device is accessed
through BIOS. Primarily used to
prevent unautho-
rized writes to hard
drives.
IDE Detect
Time Out
(Sec) 0
5
10
15
20
25
30
35 Select the time out value
for detecting ATA/ATAPI
device(s). Primarily used with
older IDE devices
with longer spin up
times.
ATA(PI)
80Pin Cable
Detection Host &
Device
Host
Device Select the mechanism for
detecting 80Pin ATA(PI)
Cable. The 80 pin cable is
required for UDMA-
66 and above. BIOS
detects the cable by
querying the host
and/or device.
Feature Options Help Text Description