Armasight ANKI000049 AIM PRO-L Advanced Integrated Mount - Manual (Page 38)

38
MALFUNCTION
PROBABLE CAUSE/ TEST/
INSPECTION
CORRECTIVE ACTION
3X Magnifier (optional)
Diopter ring cannot be
moved.
Diopter ring is bent or
broken.
Please contact
Customer Support.
Poor image quality. Check for fogging or dirt
on lens.
Clean lens as per Part
4.3.2. If image quality
is still poor, please con-
tact Customer Support.
Damaged optical compo-
nents.
Please contact
Customer Support.
4.3 MAINTENANCE
4.3.1 GENERAL
The AIM-PRO operator maintenance consists of operational tests, inspec-
tions for unit serviceability, cleaning and mounting procedures, and cor-
rective actions (troubleshooting and replacement of a limited number of
parts). Maintenance instructions covered elsewhere in this manual (PMCS,
troubleshooting, etc.) are not repeated in this section.
CAUTION:
The AIM-PRO is a precision electro-optical instrument and must be
handled carefully at all times to prevent danger to the user or damage
to the equipment.
4.3.2 CLEANING PROCEDURES
Clean the AIM-PRO and optional items as follows:
1. Gently brush off any dirt from the equipment using a clean, soft cloth.
2. Moisten the cloth with fresh water and gently wipe down the external sur-
faces (with the exception of glass surfaces).
3. Dry any wet surfaces (except for glass surfaces) with another dry, clean, soft
cloth.
4. Using a lens brush, carefully remove all loose dirt from the glass surfaces
(output prism, optional 3X Magnifier and Red Dot System lenses).
TABLE 4-2. CONTINUED