Armasight ANKI000049 AIM PRO-L Advanced Integrated Mount - Manual (Page 32)

32
2. Locate a target at the fire adjustment range (100m).
3. Take aim at the center of the target using the weapon’s iron sight; secure
the weapon in the Aiming rest. Illuminate the target, if necessary.
4. Mount the NVM to the AIM-PRO.
5. Unscrew the protective caps from the LOCK screw and boresight adjust-
ment screws.
6. Loosen the AIM-PRO LOCK screw with a screwdriver.
7. Turn on the NVM.
8. Turn on the AIM-PRO in NIGHT mode. Adjust the brightness level of the
aiming mark.
9. Observing the target with the NVM, take aim at the target by turning the
windage and elevation adjustment screws (use a screwdriver) until a red
dot appears in the center of your field of view. Shift the dot to the center
of the target.
10. After you have completed the boresight adjustment procedure, tighten
the LOCK screw and replace the protective caps.
D. Boresight Adjustment in the Daytime with an Optional 3X Magnifier
To adjust the AIM-PRO boresight in the daytime using an optional 3X Magni-
fier, do the following:
1. Mount the AIM-PRO to the weapon.
2. Locate a target at the fire adjustment range (100m).
3. Take aim at the center of the target using the weapon’s iron sight; secure
the weapon in the aiming rest.
4. Mount the 3X Magnifier to the AIM-PRO.
5. Unscrew the protective caps from the LOCK screw and boresight adjust-
ment screws.
6. Loosen the AIM-PRO LOCK screw with a screwdriver.
7. Turn on the AIM-PRO in DAY mode. Adjust the aiming mark brightness
level.
8. Observing the target with the 3X Magnifier, take aim at the target by turn-
ing the windage and elevation adjustment screws (use a screwdriver) un-
til a red dot appears in the center of your field of view. Shift the dot to the
center of the target.
9. After you have completed the boresight adjustment procedure, tighten
the LOCK screw and replace the protective caps.
E. Boresight Adjustment in the Daytime with an Optional Red Dot Sys-
tem
The boresight procedure is identical to that of boresight with a 3X Magnifier,
as shown in Part 3.3.2.D.