Armasight ANKI000049 AIM PRO-L Advanced Integrated Mount - Manual (Page 3)

3
WARNING:
When installing the equipment on a weapon, verify that the weapon is
CLEAR and that the SAFETY is ON before proceeding.
CAUTION:
Do not dismantle the equipment.
Keep the equipment clean.
Protect the AIM-PRO from moisture, sharp temperature changes, and
electrical shocks.
To avoid damage to the intensifier tube, DO NOT turn on “DAY” mode if
using the AIM-PRO in conjunction with a night vision monocular.
DO NOT over-adjust or force the controls.
DO NOT leave the equipment on when it is not being used.
Only adjust the AIM-PRO boresight with the LOCK screw loosened.
Lock the adjustment mechanism after the AIM-PRO boresight has
been aligned.
Do not store the equipment without removing the battery first.
Thoroughly dry each component of the AIM-PRO before placing them
into the storage carton.
NOTES:
Remember to zero your weapon prior to installing the AIM-PRO or ad-
justing the boresight.
The boresight adjustment screws are not permanently affixed to the
device and can be completely unscrewed.
At operating temperatures below -20°C (-4°F), alkaline battery life will
be significantly reduced. Under said conditions, the use of a lithium
battery is recommended.