Asus DiGiMatrix - Manual (Page 95)

3-63 ASUS DiGiMatrix
Soft Access Point Mode (Soft AP)
You may set the wireless LAN adaptercard in soft access point mode. In soft
AP, wireless LAN adapter can support up to 31 wireless clients in a home or
small office network.
System requirements
Before setting your wireless LAN adapter as soft AP, make sure your system
meets the following requirements:
• Windows ® XP operating system
Wireless clients in home or small office network must have:
• An installed IEEE 802.11b compliant network interface card
• Windows ® 98SE/ME/2000/XP operating system
Setting your wireless LAN adapter in Soft Access Point
(Soft AP) mode
Do any of the following to set your wireless LAN adapter in soft AP mode:
Enter the Wireless Settings utility
1.
Double-click the Control
Center icon in the Windows
taskbar to open the Wireless
Settings utility.
2. Click the Config icon in the
property window of the Wireless
Settings utility, then select the
SoftAP tab. Select Soft AP
Mode, then click Apply.
3. A confirmation window appears
click Yes.