Asus DiGiMatrix - Manual (Page 21)

2-3 ASUS DiGiMatrix
2.3 Removing the top cover
To remove the top cover:
1. On the rear panel, locate the two screws that secure the top cover to
the chassis.
2. Use a Phillips (cross) screw driver to remove the top cover screws.
Keep the screws for later use.
3. Pull the top cover slightly toward the rear panel until the side tabs are
disengaged from the chassis.
3
2
3
2
4. Hold the center edge of the top cover, then lift. Set the top cover
aside.
4
1 1