Asus DiGiMatrix - Manual (Page 27)

2-9 ASUS DiGiMatrix
2.6 Installing a DIMM
The motherboard comes with two Double Data Rate (DDR) Dual Inline
Memory Module (DIMM) sockets. These sockets support up to 2GB
system memory using unbuffered non-ECC PC2700/2100/1600 DIMMs.
Follow these steps to install a DDR DIMM.
1. Locate the two DIMM sockets
on the motherboard.
2. Unlock a socket by pressing
the retaining clips outward.
4. Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the
DIMM is properly seated.
A DDR DIMM is keyed with a notch so that it fits in only one direction. DO
NOT force a DIMM into a socket to avoid damaging the DIMM.
3. Align a DIMM on the socket
such that the notch on the
DIMM matches the break on the
socket.
1
2
2
3
4
4