GE Industrial Solutions POWER LEADER PMCS Network Architecture Guide User Manual

Page 2

GEH-6502

WARNINGS, CAUTIONS, AND NOTES

AS USED IN THIS PUBLICATION

WARNINGS

Warning notices are used in this publication to emphasize that hazardous voltages,

currents, or other conditions that could cause personal injury exist in this equipment or

may be associated with its use.
Warning notices are also used for situations in which inattention or lack of equipment

knowledge could cause either personal injury or damage to equipment.

CAUTIONS

Caution notices are used for situations in which equipment might be damaged if care is

not taken or which may cause communication errors to occur.

NOTES

Notes call attention to information that is especially significant to understanding and

operating the equipment.
This document is based on information available at the time of its publication. While

efforts have been made to ensure accuracy, the information contained herein does not

cover all details or variations in hardware and software, nor does it provide for every pos-

sible contingency in connection with installation, operation, and maintenance. Features

may be described herein that are not present in all hardware and software systems. GE

Industrial Systems assumes no obligation of notice to holders of this document with

respect to changes subsequently made.

GE Industrial Systems makes no representation or warranty, expressed, implied, or statutory, with

respect to, and assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of

POWER LEADER™, MicroVersaTrip

, Spectra

, and PowerBreak

are trademarks of GE Company.

Modbus RTU

is a registered trademark of AEG Schneider Automation.

Modbus

is a registered trademark of Modicon Inc.