2 ct multiplier table, 1 ct multipliers, Ct multiplier table -4 – GE Industrial Solutions EPM1500 Single Point Submetering System User Manual

Page 28: Ct m, Ultipliers

Text mode
Original mode

3–4

EPM 1500 SUB-METER – INSTRUCTION MANUAL

CHAPTER 3: USING THE METER

3.2

CT Multiplier Table

3.2.1

CT Multipliers

Note

The following table MUST BE used to verify the correct current readings, based on the
rating of the CT installed.

Note

The multiplier that corresponds with the CT rating MUST BE applied to the current reading
shown on the display of the EPM 1500 by multiplying that reading by the multiplier shown
above. The multiplier MUST also be applied in the same manner when calculating kW and
kWh. Failure to use the appropriate multiplier will result in an incorrect diagnosis of the
meter's functionality and incorrect revenue billing.

Table 3–1: CT Multiplier Table

CT Size

Multiplier

50 A

× 0.5

100 A

× 1

200 A

× 2

400 A

× 4

800 A

× 8

1600 A

× 32

3200 A

Ч 64