GE Industrial Solutions AF-600 FP High Power Unit Sizes 6x - Manual (Page 99)

7.1.4 Tools Required
Operating Instructions for the Drives Series Frequency Converter
Metric socket set 7–19 mm
Socket extensions 100 mm–150 mm (4 in and 6 in)
Torx driver set T10 - T50
Torque wrench 0.675–19 Nm (6–170 in-lbs)
Needle nose pliers
Magnetic sockets
Ratchet
Hex wrench set
Screwdrivers Standard and Philips
Additional Tools Recommended for Testing
Digital volt/ohmmeter (must be rated for 1200 VDC for 690 V units)
Analog voltmeter
Oscilloscope
Clamp-on style ammeter
Test cable p/n 6KAF6H8439
Signal test board p/n 6KAF6H8437
Power supply: 610 - 800 VDC, 250 mA to supply external power to 4
power cards and the control card.
Power supply : 24 VDC, 2 A for external 24 V power supply.
7.1.5 Unit Size 6x Service Shelf
The rectifier and inverter modules weigh up to 136 kg/300 lbs each and require special handling. An easy to assemble service shelf, part number 6KAF6H8835,
is available from GE to provide support of the modules for removal from the units. This shelf, or other suitable support equipment, is recommended.
Illustration 7.1: Unit size 6x Service Shelf Assembly Drawing
High Power Service Manual for Unit Sizes 6x
98
7