GE Industrial Solutions 12V Mega TLynx - Manual

Data Sheet
May 4, 2012
12V Mega TLynx TM : Non-Isolated DC-DC Power Modules:
6.0Vdc – 14Vdc input; 0.8 to 3.63Vdc Output; 30A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS09-003 ver. 1.13
PDF Name: APTS030A0X3_ds.pdf
Features

Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)

Compliant to ROHS EU Directive 2002/95/EC
with lead solder exemption (non-Z versions)

Compliant to IPC-9592 (September 2008),
Category 2, Class II
 Delivers up to 30A of output current
 High efficiency: 92.9% @ 3.3V full load
(V
IN
=12Vdc)
 Input voltage range from 6 to 14Vdc
• Output voltage programmable from 0.8 to
3.63Vdc
 Small size and low profile:
33.0 mm x 13.46 mm x 10.00 mm
(1.30 in. x 0.53 in. x 0.39 in.)
 Monotonic start-up
 Startup into pre-biased output
 Output voltage sequencing (EZ-SEQUENCE TM )
 Remote On/Off
 Remote Sense
 Over current and Over temperature protection
 Option- Parallel operation with active current
sharing
 Wide operating temperature range (-40°C to
85°C)
 UL* 60950 Recognized, CSA † C22.2 No.
60950-00 Certified, and VDE ‡ 0805 (EN60950-1
3 rd edition) Licensed
 ISO** 9001 and ISO 14001 certified
manufacturing facilities
Applications
 Distributed power architectures
 Intermediate bus voltage applications
 Telecommunications equipment
 Servers and storage applications
 Networking equipment
Description
The 12V Mega TLynx TM power modules are non-isolated dc-dc converters that can deliver up to 30A of output
current. These modules operate over a wide range of input voltage (V
IN
= 6Vdc-14Vdc) and provide a precisely
regulated output voltage from 0.8Vdc to 3.63Vdc, programmable via an external resistor. Features include remote
On/Off, adjustable output voltage, over current and over temperature protection, output voltage sequencing and
paralleling with active current sharing (-P versions). A new feature, the Tunable Loop
TM , allows the user to optimize
the dynamic response of the converter to match the load with reduced amount of output capacitance leading to
savings on cost and PWB area
TRIM
VOUT
SENSE
GND
CTUNE
RTUNE
RTrim
VIN
Co Cin
Vin+ Vout+
ON/OFF
MODULE
RoHS Compliant