GE Industrial Solutions AF-600 FP OPCEIP EtherNet_IP - Manual (Page 43)

EN-31 Net Reference
Option: Function:
Read only. Displays the reference source in Instance 21/71.
[0] * Off Reference from the network is not active.
[1] On Reference from the network is active.
EN-32 Net Control
Option: Function:
Read only. Displays the control source in Instance 21/71.
[0] * Off Control via the network is not active.
[1] On Control via the network is active
EN-33 CIP Revision
Option: Function:
Read only. Displays the CIP-version of the option software.
[0] Major version (00 - 99)
[1] Minor version (00 - 99)
EN-34 CIP Product Code
Range: Function:
1100
(AF-650 GP)
1110
(AF-650 GP)* [0 – 9999] Read only. Displays the CIP product code.
EN-37 COS Inhibit Timer
Range: Function:
[0 – 65.535 ms] Read only Change-Of-State inhibit timer. If the option is configured for COS operation, this inhibit timer
can be configured in the Forward Open telegram to prevent that continuously changing PCD data gen-
erates extensive network traffic. The inhibit time is in milliseconds, 0 = disabled.
EN-38 COS Filters
Range: Function:
[[0 - 9] Filter 0 – 9 (0000 - FFFFhex)] Change-Of-State PCD filters. Sets up a filter mask for each word of process data when operating in COS-
mode. Single bits in the PCD’s can be filtered in/out.
EN-80 FTP Server
Option: Function:
[0] * Disable Disables the built-in FTP server.
[1] Enable Enables the built-in FTP server.
EN-81 HTTP Server
Option: Function:
[0] * Disable Disables the build-in HTTP (web) server.
[1] Enable Enables the build-in HTTP (web) server.
EN-82 SMTP Service
Option: Function:
[0] * Disable Disables the SMTP (e-mail) service on the option.
[1] Enable Enables the SMTP (e-mail) service on the option.
OPCEIP EtherNet/IP
42
6