GE Industrial Solutions AF-600 FP OPCEIP EtherNet_IP - Manual (Page 39)

EN-07 Domain Name
Range: Function:
Blank [0-19 characters] Domain name of the attached network. Can be automatically assigned when using DHCP.
EN-08 Host Name
Range: Function:
Blank [0-19 characters] Logical (given) name of option.
EN-09 Physical Address
Range: Function:
[00:1B:08:00:00:00 – 00:1B:
08:FF:FF:FF] Read only Displays the Physical (MAC) address of the option.
EN-1# Ethernet Link Parameters
Option: Function:
Applies for whole parameter group.
[0] Port 1
[1] Port 2
EN-10 Link Status
Option: Function:
Read only. Displays the link status of the Ethernet ports.
[0] No link
[1] Link
EN-11 Link Duration
Option: Function:
Link Duration Port 1 (dd:hh:mm:ss) Read only. Displays the duration of the present link on each port in dd:hh:mm:ss.
EN-12 Auto Negotiation
Option: Function:
Configures Auto Negotiation of Ethernet link parameters, for each port: ON or OFF.
[0] Off Link Speed and Link Duplex can be configured in par. EN-13 and EN-14.
[1] On
EN-13 Link Speed
Option: Function:
Forces the link speed for each port in 10 or 100 Mbps. If par. EN-12 is set to: ON, this parameter is read
only and displays the actual link speed. “None” is displayed if no link is present.
[0] * None
[1] 10 Mbps
[2] 100 Mbps
EN-14 Link Duplex
Option: Function:
Forces the duplex for each port to Full or Half duplex. If par. EN-12 is set to: ON, this parameter is read
only.
[0] Half duplex
[1] * Full duplex
OPCEIP EtherNet/IP
38
6