GE Industrial Solutions EBVW017A0S14R0 Series - Manual

Data Sheet
April 11, 2013
EBVW017A0S14R0 Series Power Modules; DC-DC Converters
36-75V
dc
Input; 14.0V
dc
Output; 17A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-user equipment . All of the required procedures of end-use equipment should be followed.
¤ IEEE and 802 are registered trademarks of the Institute of Electrical and Electronics Engineers, Incorporated.
** ISO is a registered trademark of the International Organization of Standards.
BARRACUDA SERIES™ Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 Compatible with reflow pin/paste soldering process
 High and flat efficiency profile – 95.4% at 14.0V
dc
,
55% load to 90% output
 Wide Input voltage range: 36-75V
dc
 Delivers up to 17A
dc
output current
 Tightly regulated output voltage
 Low output ripple and noise
 No reverse current during prebias start-up or shut-
down
 Industry standard, DOSA compliant, Eight brick:
58.4 mm x 22.8 mm x 11.3 mm
(2.30 in x 0.90 in x 0.44 in)
 Constant switching frequency
 Positive Remote On/Off logic
 Output over current/voltage protection
 Over temperature protection
 Wide operating temperature range (-40°C to 85°C)
 UL* 60950-1, 2nd Ed. Recognized, CSA † C22.2 No.
60950-1-07 Certified, and VDE ‡ (EN60950-1, 2nd
 Ed.) Licensed
 CE mark 2006/96/EC directives §
 Meets the voltage and current requirements for ETSI
300-132-2 and complies with and licensed for Basic
insulation rating per EN60950-1
 2250 Vdc Isolation tested in compliance with IEEE
802.3¤ PoE standards
 ISO** 9001 and ISO14001 certified manufacturing
facilities
Applications
 Distributed power architectures
 Intermediate bus voltage applications
 DSL systems
Options
 Negative Remote On/Off logic (1=option code,
factory preferred)
 Auto-restart after fault shutdown (4=option code,
factory preferred)
 Base plate option (-H=option code)
Description
The EBVW017A0S14R0 series of dc-dc converters are a new generation of DC/DC power modules designed to
support 14.0V
dc
DSL applications, as distributed power architectures. The EBVW017A0S14R0 series operate from an
input voltage range of 36 to 75V
dc
, and provide up to 17A output current at 14.0V
dc
output voltage, and 240W output
power in a DOSA standard eighth brick. The converter incorporates digital control, synchronous rectification
technology, and innovative packaging techniques to achieve efficiency reaching 95.5% peak at 14.0V
dc
output. This
leads to lower power dissipations such that for many applications a heat sink is not required. Standard features
include on/off control, output overcurrent and over voltage protection, over temperature protection, input under and
over voltage lockout. Optional features include a base plate for heat sink or cold wall applications.
The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. Built-
in filtering for both input and output minimizes the need for external filtering.
RoHS Compliant