SENA ProBee-ZE20S-HAOL User Manual

Page 82

ProBee-ZE20S-HAxx User Guide Rev 1.9

Example) Write attribute to local node.

AT+SWRITE=0101,0003,01

# Write device attribute

# Door Lock cluster(0x0101),

# Door state attribute(0x0003)

# Set to 0x0001 (Closed)

# Response

Example) Write attribute to remote node.

AT+DEST=3A51,01

# Set destination node address

# Response

AT+CWRITE=0101,0003,01

# Write destination’s attribute

# Door Lock cluster(0x0101),

# Door state attribute(0x0003)

# Set to 0x0001 (Closed)

# Response

9.6

Sending HA Command

HA Clusters have attributes and commands, and cluster command can be committed by AT command.

Example)

There are two end nodes which makes up HA network. Coordinator is ProBeeHADL device which

implements Door Lock Server Cluster. Router is ProBeeHACI device which implements Door Lock Cluster.

ProBeeHACI device sends AT+LOCK command to ProBeeHADL device as below:

AT+DEST=0000,01

# Set destination node address

# Response

AT+SREAD=0101,0000

# Read destination’s attribute

# Door Lock cluster(0x0101),

# Lock state attribute(0x0000)

# Unlocked

# Response

AT+LOCK

# Door Lock command

# Response

AT+SREAD=0101,0000

Read destination’s attribute

# Door Lock cluster(0x0101),

# Lock state attribute(0x0000)

# Locked