SENA ProBee-ZE20S-HAOL - Manual (Page 62)

ProBee-ZE20S-HAxx User Guide Rev 1.9 62
the parent are also displayed.
Execute AT+RSSI?
Response
Sender: , Parent: FFFF, RSSI: , LQI:
OK
7.5.5 AT+NODETYPE or AT+NT
Description
Get/Set the node type. (0: none, 1: coordinator, 2: router, 3: end-device, 4: sleepy
end-device)
Execute AT+NODETYPE? AT+NODETYPE=
Response
OK
OK or ERROR
Default 0
Range 0 – 4
7.5.6 AT+PERMIT or AT+PJ
Description
Permit other nodes to join the network. (0~254s, 255=continuance) An end-
device cannot perform it.
Execute AT+PERMIT AT+PERMIT=
Response OK
Range 0 – 255
7.5.7 AT+LEAVE or AT+LV
Description Leave the current network.
Execute AT+LEAVE
Response OK
7.6 End-device
7.6.1 AT+SLEEP or AT+SM
Description Enter the sleep mode immediately if the node is a sleepy end-device.
Execute AT+SLEEP
Response OK
7.6.2 AT+PARENTLA or AT+PL
Description Get the 64-bit IEEE address of the parent node.
Execute AT+PARENTLA?
Response
OK