SENA ProBee-ZE20S-HAOL - Manual (Page 63)

ProBee-ZE20S-HAxx User Guide Rev 1.9 63
7.6.3 AT+PARENTSA or AT+PS
Description Get the 16-bit Node ID of the parent node.
Execute AT+PARENTSA?
Response
OK
7.6.4 AT+CHILDTABLE or AT+CT
Description Get the child table composed of the end-devices.
Execute AT+CHILDTABLE?
Response
||
List of the child nodes…
OK
7.7 Data Transmission and Reception
7.7.1 AT+MAXPAYLOAD or AT+MP
Description
Get the maximum size of the payload that the Application Support sub-layer will
accept. The size depends on the security level in use.
Execute AT+MAXPAYLOAD?
Response
OK
7.8 Security
7.8.1 AT+SECURITY or AT+SE
Description
Get/Set the security status. (0: turning security off, 1: on) Every node must be
under the same security level in the network.
Execute AT+SECURITY? AT+SECURITY=
Response
OK
OK or ERROR
Default 1
Range 0 – 1
* Changed valued 1 from 0
7.8.2 AT+LINKKEY or AT+LK
Description Get/Set the 128-bit link key. (0 or 0s: generate 128-bit random number)
Execute AT+LINKKEY? AT+LINKKEY=
Response
OK
OK or ERROR
Default 5A6967426565416C6C69616E63653039