SENA ProBee-ZE20S-HAOL User Manual
Page 81
ProBee-ZE20S-HAxx User Guide Rev 1.9
81
1
# Locked
OK
# Response
Following table shows what means attribute value in example.
Table 9-1 Door Lock cluster’s attribute (in HA specification document)
Attribute
Identifier
Description
Type
Default
0x0000
Lock State
0x00: Not fully locked
0x01: Locked
0x02: Unlocked
Enum8
0
0x0001
Lock Type
0x00: dead bolt
0x01: magnetic
0x02: other
0x03: 0xff reserved
Enum8
0
0x0002
Actuator Enabled
Boolean
0
0x0003
Door State
0x00: Open
0x01: Closed
0x02: Error (Jammed)
0x03: Error (Forced Open)
0x04: Error (Unspecified)
0x05: 0xff reserved
Enum8
0
0x0004
Number of Door Open Events
Int32u
0
0x0005
Number of Door Closed Events
Int32u
0
0x0006
Number of minutes door has been open since this last
time it transitioned from close to open
Int16u
0
9.5
Writing Attribute
User can write attribute to local node or remote node by running the AT command as below:
AT+SWRITE can be used for writing attribute to local node.
AT+CWRITE can be used for writing attribute to remote node.
User should set destination address by command AT+DEST before running AT+CWRITE.
Destination node must implement corresponding attribute and cluster.