QTECH QSW-2800 Инструкция по настройке - Manual (Page 380)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
366
ulpp group master
no ulpp group master
Configure or delete the master port of ULPP
group.
ulpp group slave
no ulpp group slave
Configure or delete the slave port of ULPP group.
3. Show and debug the relating information of ULPP
Command Explanation
Admin mode
show ulpp group [group-id]
Show the configuration information of the
configured ULPP group.
show ulpp flush counter interface
{ethernet | }
Show the statistic information of the flush
packets.
show ulpp flush-receive-port
Show flush type and control VLAN received
by the port.
clear ulpp flush counter interface
Clear the statistic information of the flush
packets.
debug ulpp flush {send | receive} interface
no debug ulpp flush {send | receive}
interface
Show the information of the receiving and
sending flush packets, the no operation
disables the shown information.
debug ulpp flush content interface
no debug ulpp flush content interface
Show the contents of the received flush
packets, the no operation disables the
showing.
debug ulpp error
no debug ulpp error
Show the error information of ULPP, the no
operation disables the showing.
debug ulpp event
no debug ulpp event
Show the event information of ULPP, the no
operation disables the showing.