beautypg.com

Reminder, Installation instructions (continued) p/n: as-1003 – S&B Filters Cold Air Intake Scoop AS-1003 User Manual

Page 4

background image

15461 Slover Ave., Fontana, CA 92337 - Phone: (909) 947-0015 - Fax: (909) 947-0603 -

www.sbfilters.com

SEE EXPLODED VIEW ON PAGE 4

4

Precision II

Filter Cleaning & Oiling

Order online today at

www.sbfilters.com

or

through your local S&B distributor.

Part #: 88-0008

Testing and Maintenance

• Engage parking brake and start your engine.

Listen for abnormal noises. If an air leak is

detected, re-inspect hoses and connections as

they may need to be repositioned and tightened.

• S&B FILTERS recommends that you keep

your OE intake system in the event it is

required in the future.

• In order to maintain your warranty, all connections

and components must be checked periodically for

alignment and for proper tension on all

connections. Failure to do so may void your

warranty.

• Use only S&B FILTERS cleaning and oil products

to service your filter. Using any other brand oil

and or cleaners on your S&B air filter will void

your warranty.

Air Filter Wrap

Use with Oiled or Dry Filters

Order online today at

www.sbfilters.com

or

through your local S&B distributor.

Part #: WF-1035

Scoop Obstruction:
Regularly inspect the entire Scoop Inlet for any obstruction or debris that may impede the flow of air.

Ride Height
Once the Scoop has been installed, make sure there is plenty space between your tire and the scoop before driving.
The scoop system may not work with aftermarket wheels and tires.

REMINDER!

Water Ingestion Disclaimer:
This product is intended for general highway use only! Under normal driving conditions water ingestion is usually not
an issue; however, if the product becomes submerged from rain splashes or mud puddles due to harsh rains or
flooding the engine may ingest water which could cause severe engine damage. Do NOT use this product when
crossing any body of water including but not limited to large puddles, streams, rivers or lakes.

If your engine ingests water, this could cause severe engine damage by hydro-lock or other conditions. Care should be
taken to avoid these driving conditions. ENGINE DAMAGE CAUSED BY THE INGESTION OF WATER INTO THE
ENGINE IS THE DRIVER’S RESPONSIBILITY AND IS NOT COVERED BY S&B FILTERS!

INSTALLATION INSTRUCTIONS (continued)

P/N: AS-1003