Powersolve Xi Series - Manual (Page 7)

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England
Tel: 01635 521858 Fax: 01635 523771 Email: [email protected]
www.powersolve.co.uk
Uninterruptible Power Supplies
Front Panel Layouts
Number Description
1 Remove panel to access battery compartment (up to 1.5kVA only - other models have separate battery module)
2 Top/bottom clips for releasing LCD display (to rotate through 90°) for standalone applications
3 Backlit full function LCD display
4 Keys for menu selection, bypass and menu select. See below
5 Input breaker
Xi LCD Display
To allow for use in either rack-mount or standalone format, the
LCD display can be rotated using the top/bottom clip as shown
to the right.
A retaining screw is then used to fix the panel in place.
Never rotate panel while UPS is on.
Information available from LCD:
Input Voltage: VAC
Output Frequency: Hz
Output Voltage: VAC
Battery Voltage: VDC
Load: %
Ambient Temperature: °C
Heatsink Temperature: °C
Output Current: A
Turn on/off the inverter or force unit to
bypass. Start UPS from battery when mains
is not available.
Select the status shown on the second
(bottom) row of the LCD. Used for setting the
function or parameter.
Select the status shown in the first (top) row
of the LCD or review parameters in the M
menu.
Enter edit menu. Selects standard UPS
parameters including output voltage, battery
test, etc.
Xi Front Panel Buttons