Powersolve TEP100 Series - Manual

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England
Tel: 01635 521858 Fax: 01635 523771 Email: [email protected]
www.powersolve.co.uk
High Density DC-DC Modules
TEP100 Series, 100 Watt
Features
• High power density
• Wide 2:1 input voltage range
• Very high efficiency up to 93%
• Soft start, Reverse Input Protection
• Adjustable Output Voltage
• Shielded metal case with aluminium baseplate
• Optional adapter for screw terminal connections
Electrical Specification
Output Voltage Adjustment +10% / -20% by external resistor
Conducted EMI EN 55022 class A, FCC level A (with filter)
Over Current Protection 110-140% of Iout max.
Over Voltage Protection 115-130% of Vout nom.
Short Circuit Protection Continuous, automatic recovery
Reverse input protection Parallel diode
Operating Temperature Range -40°C to +75°C with heatsink (derating applies)
Temperature Coefficient ±0.02%/K
Thermal protection shutdown at 115°C
I/O Isolation test voltage 2250VDC (basic insulation)
Safety Approvals cUL/UL 60950-1, IEC/EN 60950-1
Casing shielded metal case with aluminium baseplate
Remote On/Off shutdown input for low input current (3mA) in standby operation
Output Voltage and Current Ratings
MODEL INPUT OUTPUT OUTPUT RIPPLE & LINE REG. LOAD REG. EFF.
VOLTAGE VOLTAGE CURRENT NOISE
TEP 100-1210 3.3VDC 25A 75mV pk-pk max. 0.2% 0.3% 90%
TEP 100-1211 5.0VDC 20A 75mV pk-pk max. 0.2% 0.3% 91%
TEP 100-1212 12VDC 8.4A 100mV pk-pk max. 0.2% 0.3% 91%
TEP 100-1213 9 - 18V 15VDC 6.7A 100mV pk-pk max. 0.2% 0.3% 91%
TEP 100-1215 24VDC 4.2A 200mV pk-pk max. 0.2% 0.3% 90%
TEP 100-1216 28VDC 3.6A 200mV pk-pk max. 0.2% 0.3% 90%
TEP 100-1218 48VDC 2.1A 300mV pk-pk max. 0.2% 0.3% 90%
TEP 100-2410 3.3VDC 25A 75mV pk-pk max. 0.2% 0.3% 91%
TEP 100-2411 5.0VDC 20A 75mV pk-pk max. 0.2% 0.3% 93%
TEP 100-2412 12VDC 8.4A 100mV pk-pk max. 0.2% 0.3% 93%
TEP 100-2413 18 - 36V 15VDC 6.7A 100mV pk-pk max. 0.2% 0.3% 93%
TEP 100-2415 24VDC 4.2A 200mV pk-pk max. 0.2% 0.3% 92%
TEP 100-2416 28VDC 3.6A 200mV pk-pk max. 0.2% 0.3% 92%
TEP 100-2418 48VDC 2.1A 300mV pk-pk max. 0.2% 0.3% 92%
TEP 100-4810 3.3VDC 25A 75mV pk-pk max. 0.2% 0.3% 91%
TEP 100-4811 5.0VDC 20A 75mV pk-pk max. 0.2% 0.3% 93%
TEP 100-4812 12VDC 8.4A 100mV pk-pk max. 0.2% 0.3% 93%
TEP 100-4813 36 - 75V 15VDC 6.7A 100mV pk-pk max. 0.2% 0.3% 93%
TEP 100-4815 24VDC 4.2A 200mV pk-pk max. 0.2% 0.3% 92%
TEP 100-4816 28VDC 3.6A 200mV pk-pk max. 0.2% 0.3% 92%
TEP 100-4818 48VDC 2.1A 300mV pk-pk max. 0.2% 0.3% 92%
Options
Heatsink: order code TSP-HS1 (separate order)
Chassis mount adapter: add suffix -CM*
Chassis mount adapter with EMI filter: add suffix -CMF*
*shipped assembled with converter module
(models pictured with chassis mount adapter and optional heatsink)