Powersolve CANopen Interface - Manual

PSC-PB - PROFIBUS Power Sup ply Con trol ler
Interface between PROFIBUS DP Bus System and a Power Supply
• PROFIBUS DP V0 Standard
• Up to 12 Mbit/s PROFIBUS DP communication
PSC-CAN card
PSC-CAN - CANopen Power Supply Controlle
r
Interface between CANopen Bus System and Power Supply
• CANopen standard
• Up to 1Mbit/s communication, baud rate dip switch selectable
Field Bus In ter faces
Unit 8A
Arnhem Road
Newbury. RG14 5RU Tel: +44 (0) 1635 521858
Fax: +44 (0) 1635 523771
www.powersolve.co.uk
PSC-PB card
Features
• Node address setting selectable • Factory installed
• 600 V galvanic isolation • 14-bit resolution for voltage and current setting and read back
• Read back of power supply status signals • Setting the power supply in Shut Down mode
• Voltage and current programming and monitoring • Programming and monitoring accuracy < 0.1 %