Powersolve TIS Series with Function Modules - Manual

www.powersolve.co.uk
Powersolve Electronics Ltd. 8A, Arnhem Road, Newbury, RG14 5RU. England
Tel:01635 521858 Fax: 01635 523771 Email: [email protected]
Description *Order code Output power Output voltage Output current
max. nominal max.
Models with TIS 150-124 RED 150 Watt 24 VDC 6 A
RED Module TIS 150-148 RED 150 Watt 48 VDC 3 A
TIS 300-124 RED 300 Watt 24 VDC 12 A
TIS 300-148 RED 300 Watt 48 VDC 6 A
TIS 600-124 RED 600 Watt 24 VDC 24 A
TIS 600-148 RED 600 Watt 48 VDC 12 A
Models with TIS 150-124 SIG 150 Watt 24 VDC 6 A
SIG Module TIS 150-148 SIG 150 Watt 48 VDC 3 A
TIS 300-124 SIG 300 Watt 24 VDC 12 A
TIS 300-148 SIG 300 Watt 48 VDC 6 A
TIS 600-124 SIG 600 Watt 24 VDC 24 A
TIS 600-148 SIG 600 Watt 48 VDC 12 A
Models with TIS 300-124 UDS 300 Watt 24 VDC 12 A
UDS Module TIS 600-124 UDS 600 Watt 24 VDC 24 A
Battery Pack TIS 24-32 AP 24 VDC 3.2 Ah
TIS 24-70 AP 24 VDC 7 Ah
* includes power supply, relative function module and terminal plugs
= Additional Functions for System Applications in
Process Automation, Machine Tools, etc.
= Basic Model Power Supplies can be extended with one
of the following integrated Function Modules:
RED: for True N+1 Redundancy Operation
SIG: AC-Power Fail, DC-OK Signal plus Remote On/Off
UDS: DC-UPS with automatic Battery Management
Industrial Power Supplies
TIS Series with Function Modules
Models
RED Module
With this module it is possible to parallel up
to 5 power supplies with active current
sharing for true N+1 operation. De-coupling
diodes (OR-ring diodes) and also alarm
output to signal a unit failure are included in
this option.
SIG Module
This module provides 3 functions: AC-Power
fail signal and DC-OK signal, both with
isolated relay contacts. In addition a remote
On/Off input is available to control the power
supply.
UDS Module
With this module, a professional battery
management system to charge and monitor
an external battery is added to the basic
power supply. In case of a power failure the
battery is switched automatically and without
any interruption to the DC-output.Power fail
and low battery alarm signals are available.
During normal operation battery status is
checked periodically and the external battery
is fully protected under any operation
condition.
Battery Pack
The battery pack contains high quality,
maintenance free lead-acid batteries with 3.2
Ah resp. 7.0 Ah capacity fixed together with a
resetable fuse in a mounting frame. Together
with models TIS 300-124 UDS or TIS 600-
124 UDS the battery pack provides a
complete and reliable DC-UPS
system.Backup time depends on load current
and battery capacity.
For further information and specifications
please refer to Industrial Power Supplies TIS
Series 50–600 Watt. Dimensions same as
basic models.