Powersolve TOP200 Series User Manual
Ac-dc power supplies, Features
Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England
Tel: 01635 521858 Fax: 01635 523771 Email: [email protected]
AC-DC Power Supplies
TOP 200 Series, 200 Watt
Features
•
Highest power density in 127 x 76.2mm footprint
•
Supplies 200W with convection cooling
•
High efficiency of 90% typical
•
Operating temperature range of -25°C to +70°C
•
Compliance with EN 61000-3-2
•
Low leakage current
•
Safety class I and class II
Electrical Specification
Input voltage range
85-264Vac with derating at low mains input
Input Frequency
47-63Hz
EMI emission
EN 55022 class B, harmonic current EN 61000-3-2 class A
EMI immunity
EN 61000-4-2, -3, -4, -5, -6, -11
Output current limitation
120-150% of Iout max.
Short Circuit Protection
foldback, automatic recovery
Overvoltage protection
>150% of Vout nom. (12 & 15V models), >125% of Vout nom. (24 & 48V models)
Operating Temperature Range
-25°C to +70°C (convection cooling) (derate linearly to 80W at 70°C above 40°C)
Safety Approvals
cUL/UL 60950-1, IEC/EN 60950-1
Degree of protection
Class I, class II prepared with second fuse
Output Voltage and Current Ratings
MODEL
OUTPUT
OUTPUT
OUTPUT
RIPPLE &
LINE REG.
LOAD REG.
EFFICIENCY
POWER
VOLTAGE
CURRENT
NOISE
TOP 200-112
200W
12VDC
16A
120mV pk-pk max.
1.0%
1.0%
90%
TOP 200-115
200W
15VDC
13A
120mV pk-pk max.
1.0%
1.0%
90%
TOP 200-124
200W
24VDC
8.3A
120mV pk-pk max.
1.0%
1.0%
92%
TOP 200-148
200W
48VDC
4.2A
150mV pk-pk max.
1.0%
1.0%
92%
Mechanical & Connection Details
J1
Mating connector: Molex 09-50-3031
Crimp Terminal: Molex 08-52-0072
Pin
Function
1
AC in Live
2
AC in Neutral
PE
Mating connector: TAB-6.3 (¼”)
Protective Earth if used as safety class 1 unit
J2
Mating Connector: Molex 09-50-3061
Crimp Terminal: Molex 08-52-0072
Pin
SINGLE OUTPUT
1
+Vout
2
+Vout
3
+Vout
4
-Vout
5
-Vout
6
-Vout
J3
Mating Connector: Molex 22-01-2025
Crimp Terminal: 08-50-0032
Pin
Function
1
Contact
2
Current
Pin 1 connected to secondary ground will turn unit OFF
Output voltage may pulse to 20% of nominal output voltage
Pin 2 connected to ext. current source of 10mA will turn unit OFF
No pulsing of output voltage
Pin 1 & 2 open circuit: unit is ON
Dimensions in Inches (mm)
www.powersolve.co.uk