Powersolve Xi Series - Manual (Page 11)

Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England
Tel: 01635 521858 Fax: 01635 523771 Email: [email protected]
www.powersolve.co.uk
Uninterruptible Power Supplies
Software Options
The Xi Series is supplied as standard with XProtect software. However, the Xi Series has been designed to work with UPSilon
software packages, which allow the user to use the Xi Series where MSXP UPS have previously been used.
UPSilon software must be used with the supplied RS232 cable. It will not function if used with the green UPSilon cable.
UPSilon is also available for Unix operating systems - please consult sales office for details.
XProtect Features:
• Simple installation & configuration
• Read/write function allows for engineer configuration of UPS
• Simple meter display of load battery capacity & temperature
• Complete data & event logging as standard
• Configurable tool bars
All models within the Xi range are provided as standard with shutdown &
monitoring software.
This software is supplied on a CD and covers all Windows® based
platforms. The software offers all of the functionality of standard shutdown
packages with some additional features for remote monitoring and
control.
Monitoring is achieved either locally through the RS232 cable (supplied)
or remotely via a connected network. This can provide the user with
information about major input and output parameters along with alarm
information as and when it appears.
Control is via the console in the software and allows the user (again
locally via the serial connection or remotely via network connection) to
schedule remote system shutdown (password controlled) and general
UPS housekeeping.
In combination with its very flexible shutdown features, the software also
lets the user know which programs were shutdown at last mains failure,
to ensure that no saved files go unmissed.